• +91-265-2643870

  • environ@environengg.com

  • 864/B/3, G.I.D.C.,

  • Makarpura, Vadodara – 390 010

Save Energy by Installing New Generation of Environ Energy Efficient Aerators


SAVE 20% to 40% ENERGY


How Energy is saved ?

In any biological aeration system apart from oxygen transfer, mixing is also equally important.

The efficiency of the oxygen transfer along with the energy mixing efficiency of Environ Energy Efficient Aerators (EEEA) is more compared to the mechanical aerators available in the market.

Environ in their R & D facility had taken the trials of the oxygen transfer efficiency along with the mixing efficiency at different RPM of impellers & concluded that the suitable RPM of the aerator impellers for maximum oxygen transfer efficiency along with the maximum mixing efficiency can be achieved with 100 RPM impellers. So, EEEA impellers are provided with 100 RPM. The influence zone of the aerator impeller is also more in case of EEEA. No other manufacturer in India are providing the aerators with 100 RPM.

Secondly, the EEEA impellers are provided with Dual Impeller design. The functioning of the Dual Impeller is like :

  • Top impeller is provided for maximum oxygen transfer.
  • The extra bottom impeller is provided for thorough mixing. It works as a mixer, so mixing energy is reduced & due to thorough mixing the oxygen transfer efficiency of the impeller is increased & hence with lesser HP more oxygen transfer is achieved, hence energy saving. Secondly, due to the bottom impeller the whole mask is mixed thoroughly & it can cater the higher depths upto 5.5 mtrs. SWD in aeration tank.

‘Environ’ Make Energy Efficient Aerators


There are TWO Types of Aerators manufactured by ENVIRON:

  • Fixed Type Slow Speed Energy Efficient Aerators – from 2HP to 150HP ratings.
  • Floating Type Slow Speed Energy Efficient Aerators – from 2HP to 100HP ratings.

1. Fixed Type Slow Speed Energy Efficient Surface Aerators :

Years of intensive Research & Development have accomplished the development of the ‘Energy Efficient Aerator’. The result is a sturdy unit which combines high oxygenation efficiency (Oxygen Transfer Capacity ranging from 2.4 Kg. of O2 to 3.27 Kg. of O2 /kw/hr, depending upon 2 2 the size & atmospheric condition) with thorough mixing and propulsion of the influence to disperse the oxygen throughout the whole mass of the effluent zone and vigorous agitation to achieve the minimum ripple velocity to keep the solids in suspension. The entire design is amazingly so simple that it is very easy to install, to run and to maintain. It can be mounted on R.C.C. platform or on fabricated steel platform or on pontoons.

image

Special Features

  • Fabricated & machined Base Frame for 5HP to 15HP ratings & for 20HP & above Heavy ISMB Beam Base is provided. So, vibrations are lessened & again the Base is machined on the Top Surface on Heavy Duty Lathe, so the life of the Gearbox is increased. (we are the only mfg. in India to provide this feature).
  • Cantilevered load reaction is passed through additional bearings & housing to Bottom of the Beam Base & to RCC platform. So, gear is not at all affected by overhung load. So life of the gearbox is increased.
  • Additional Bearing Support is provided to the Aerator Shaft, so the unbalanced cantilevered loads are NOT passed to the output shaft of the Gearbox, but those loads are taken by TWO EXTRA bearings & housing. So, life of the Gearbox is increased. (no other mfg. in India are providing this feature).
  • Amply designed MS FULLY MACHINED Solid Shaft to take care of heavy cantilevered, unbalanced,& torsional loads, supported on Two numbers heavy duty antifriction bearings housed in heavy duty cast iron bearing housing. Since, Shaft is fully machined, No possibility of OUBLING of Shaft concentric running of Impeller is ensured. (no other mfg. in India are providing this feature) N.B.: Tubular Shaft in Aerators with Helical Gears are provided.
  • Impeller is designed as single shrouded pump Impeller to achieve maximum Oxygen Transfer & Mixing efficiency. Being a Semi open type Impeller, it has got a very valuable features of self cleaning. Hence practically zero maintenance is required for the Impeller. Secondly, the Impeller is machined at centre for its concentric running. (we are the only mfg. in India to offer this feature).

    Due to conical Impeller & solid MS Shaft, CG lies nearer to centre, so less impact loading.
  • NEW GENERATION of EEEA having the special unique feature of Additional Impeller at the Bottom for better mixing at the floor level of Aeration Tank having total tank Water Depth upto 5.5m. Due to which the Oxygen Transfer Efficiency of the Impeller is increased & hence with lesser HP more Oxygen Transfer is achieved. Secondly, less area is required due to water depth of 5.5m. civil construction cost& the space required will be less hence economical.
  • Greaves / Elecon Worm reduction Gears (or helical gears only if asked for) having suitable service factor are offered. Secondly, maintenance of the gearbox is minimal & handling is easier, as the extra Bearings are provided to the Impeller Shaft. Spares of the worm gearbox are also easily available at comparatively lower cost.
  • Motors of Crompton / ABB / Bharat Bijlee / Siemens are offered.
  • Jaw type coupling of standard make are provided.

2. Floating Type Slow Speed Energy Efficient Aerators :

They are sturdy, vibration less, having higher influence zone & can also cater higher depths as compared to High Speed Floating Aerators.

Special Features

Not affected by Hydraulic level variation in Aeration Tank, High Mixing rate alongwith higher Oxygen Transfer Efficiency. Easy to install, easy to operate & No RCC Platform required, hence quite economical installation. Flexibility of position change of Aerators & insertion of new Aerators for increased load in Aeration Tank, in case of expansion, without any change in Aeration Tank. These Aerators are also offered with Special Designed DUAL IMPELLERS for depths upto 5.5Mtrs. of Aeration Tanks & hence one can go for very compact Aeration System.

Construction Features

Electric Motor, Gear Reducer, Base, Shaft, Impeller & Couplings are same of both types of Aerators (Fixed & Floating Aerators).

Floats

PU Filled FRP Lined (for 10HP & above ratings) ISO Resins are used in FRP Lining as standard OR SS-304, SS-316 Construction can also be provided, if required, with necessary hooks for mooring Nylon ropes.

N.B. :- Wetted Parts for both types of Aerators are Epoxy Painted / FRP Lined.

image

New Generation of Energy Efficient Aerators with Specially designed Impellers. Offered for SIDE WATER DEPTH upto 6.0 mtrs. Aeration Tanks.


image

Installation of Floating Aerator at Site

Inhouse Hydraulic Testing Facilities

image

Floating Slow Speed Aerator in our Hydraulic Testing Facility


image

The company strongly believes in R & D and Quality Assurance & has gone for AERATORS TESTING FACILITY upto 150HP ratings right in the inception of the company’s formation. Under our Quality Assurance Plan each & every Aerator & Agitator, which is manufactured, shop assembled are run for two hours in HYDRAULIC TESTING FACILITY before dispatch.

Oxygen Transfer Testing Facility (unique in India)

ENVIRON is the only manufacturer in India, who have got the OXYGEN TRANSFER TESTING Facility as per American Standard & Wrinkler’s Procedure. It can be offered at an extra cost, if asked for.

Oxygen Transfer Efficiency of our ENVIRON make ENERGY EFFICIENT AERATORS tested in our OXYGEN TRANSFER TESTING FACILITY as below :-

image



INSTALLATIONS AT CETP / ETP WITH ENERGY CONSERVATION BY “ENVIRON” ENERGY EFFICIENT AERATORS

image

16 Nos. Floating Type ENVIRON Energy Efficient Aerators installed at Pattancheru CETP. (Stopped injecting liquid oxygen & saving in power also)

image

Replaced Diffused Aeration System & Fixed Aerators of other make at Vapi CETP with 20 nos. 40 HP ENVIRON Energy Efficient Aerators.

image

Replaced Diffused Aeration System with 9 nos. Floating Type 30HP ENVIRON Energy Efficient Aerators at Mahad CETP.

image

Replaced 75HP Existing Aerators of other make with 8 nos. 40 HP ENVIRON Energy Efficient Aerators at M/s. Tamilnadu News Print & Papers Ltd. – Kaghatipuram, T.N.

image

100 HP Energy Efficient Aerators Installation at M/s. Aurobindo Pharma Ltd. – Vizag Plant

Economical Pollution Control Equipments

Our Humble contribution by way of manufacturing efficient environmental machineries, designed by foreign trained personnel having more than 50 years experience, at the most economical price and shortest deliveries for various industries.

Environ Engineering Company – Vadodara have also got the Oxygen Transfer & Hydraulic Testing Facility as per the International Standard to Test the Fixed & Floating Type Energy Efficient Surface Aerators upto 150 HP rating. It is a unique in India.

image

Replaced 75HP with 40HP ENVIRON Energy Efficient Aerators at M/s. Tamilnadu News Print & Papers Ltd. – Kaghatipuram, T.N.